Curtain wall angle code and embedded parts need to be connected around the full weld
Do not need to cover all around the weld, the length of the weld are calculated according to the length of the weld as long as the design requirements on the line, the general drawings are marked with the height and length of the weld.
The adapter and the embedded parts are generally except for the slot type
But taking into account the scene of some factors, such as the quality and level of workers. General drawings will be marked full of welding. You calculate the weld is 100mm, his part of the site welding force may not be able to reach 100mm. So the drawings indicate the weld will be higher than the calculation of some.
1, the blank corner is the weld form number 8 is the thickness of the weld, that filling the flag is on behalf of the field welding, that circle is on behalf of welding.
2, welding seam welding, trilateral welding, single-sided welding This is to be calculated, the specific no standard requirements.
3, this should take into account the external decoration materials bear the wind load, automatic, shear, torque, bending moment and so on. And then calculated by the formula of the length of the weld, the general calculation of the length of the weld are representative of the length of a single side, such as a No. 10 channel bearing, calculated weld length is 300mm so that you need full welding, if it is 100mm That is unilateral welding.
