Home > categories > Construction & Real Estate > Bathroom Sinks > How do the basin table, see figure
Question:

How do the basin table, see figure

This basin countertop how to do, I probably do one meter long, half a meter wide, the thickness of 10 centimeters. Want to put the surface paste glazed tiles, directly with steel frame nailed to the wall or how to get, also use this stage basin. Can we do that in terms of load bearing? What is the bottom of this table? But also with the same material above, how to paste tiles? I need to go where to get these materials

Answer:

Also, the thickness of the table you see is only its surface thickness, which is empty, it is only the side is so thick. Its bottom is actually the back of the stone, do not need to do brick processing, do the stone should know how to do it, it is the table made of a box shape, only the steel side is empty, and then put the steel into the box , So that the steel can force, that white is up and down there are two stone sandwich the steel, and then through the stone table contact with the three sides of the brick up and down to fix this. Remember that the table and the basin is the whole, so that the stone to give you a good stick back to install up to put on the brick OK. Oh yes, just do the cement mortar is dry is remembered in the bottom with a stick support for some time, the cement river sand dry can win down.
And then called the amount of stone a good size, and then buy the top of the table above the basin, to the stone, so he put the table to open a good hole and the pot with glue on the table to make it a whole, and then take back on Above the brick and cement mortar fixed just fine. You carefully observe the figure in the table is actually three-party force, the most inside the wall stickers out of the thickness of 2 cm, in fact, with the tiles up and down the table to die, and then coupled with the force of steel, so this hair Is fully guaranteed to use.
First of all this is stone, tiling is not good to do, very troublesome, can only use stone to do, it is a whole. Our company often do this, we are like this, first buy six 12 to 14 of the steel (about 65 length), and then buy two 1 meter of steel. In the wall to play 6 holes, 6 with 65 steel loaded into the cement mortar filled with fixed, and then with two one meter of steel bar in a few short steel bars on the steel frame.

Share to: