How does the idle car tire be placed and maintained?
Placed cool and ventilated, 24 degrees to 28 degrees or so the place is best to point a little vertical way. As if in the middle of the cool clothes from the middle through the root stick up, so that does not account for the place. Free time to turn a branch of the bit on it.
Tires should be stored in a dry warehouse, to avoid sun and rain, not too much ventilation. Large-scale tire warehouse should be equipped with a thermometer and hygrometer, the temperature should be controlled at -10 ~ +30 ℃, relative humidity of 50% to 80% is appropriate. Tires should be placed away from heat sources, power generation equipment and where ozone can be generated to prevent tires from accelerating. Tires can not be with flammable materials and oil, acid, alkali and other chemicals together. Avoid sunshine, moisture, high temperatures and chemicals.
New tires or remove the tires that are not used temporarily, is not simply placed on it, if stored properly will affect the tire life. Tire storage environment, should also be used as a check tire shop management is a perfect aspect.
Idle car tire placement and maintenance should pay attention to the following aspects: (1) tires should be stored in a dry warehouse, to avoid sun and rain, not too much ventilation. Large-scale tire warehouse should be equipped with a thermometer and hygrometer, the temperature should be controlled at -10 ~ +30 ℃, relative humidity of 50% to 80% is appropriate. (2) Tires should be placed away from heat sources, power generation equipment and where ozone can be generated to prevent tires from accelerating. (3) tires can not be with flammable materials and oil, acid, alkali and other chemicals together. Avoid sunshine, moisture, high temperatures and chemicals. (4) Packed tires should be placed vertically on the shelves. Long-term placement of the tire should be rotated regularly to change the placement of its fulcrum, so as not to cause tire deformation. (5) Tires and wheels installed together, should be slightly inflated, so that the tire can withstand a certain pressure. (6) tires in custody, should be done in accordance with the production or storage time in batches, first-in first out, in order to use.
