And I know I need to clean it. It is best to filter out the stones out. But it is sealed. How to deal with?
The activated carbon layer cleaning: when activated carbon adsorption capacity, would not achieve the role of adsorption, the water will appear at this time to smell, timely cleaning, remove the activated carbon layer, first with edible salt water soak for 2 hours, wash with alkali activated carbon adsorption of microorganisms, the immersion process may be appropriate to increase the temperature. Then rinse with water. Saturated with edible salt water soak for 2 hours, rinse clean water can be used again.
How to clean the activated carbon filter rodAnd I know I need to clean it. It is best to filter out the stones out. But it is sealed. How to deal with?The name was upset | browse 2591Recommended 2016-12-03 13:35:21 best answerCleaning method of activated carbon filtration equipment for drinking machine:1, the outer ring winding line, pipe and net should be washed with high pressure water, light brush, and soaked in bleach solution for one hour, then rinse off with clean water.2, a simple cleaning method for granular activated carbon from activated carbon particles, with water several times and then put it back.3, granular activated carbon the correct cleaning method, dilute hydrochloric acid for four hours, rinse clean water, and then oven drying at room temperature for three hours, remove and then rinse with water, can restore its activity.The filter layer of the water dispenser is essentially a filter paper layer, an activated carbon layer, a stone layer and an ion resin layer. According to different water quality, the filter layer filtering ability, service life is different, in general, the 2-3 filter should be cleaned once a month, a year or so replace the filter, if the water quality is good, the use of time will be appropriate to long, with no smell for water.
2, a simple cleaning method for granular activated carbon from activated carbon particles, with water several times and then put it back.3, granular activated carbon the correct cleaning method, dilute hydrochloric acid for four hours, rinse clean water, and then oven drying at room temperature for three hours, remove and then rinse with water, can restore its activity.
Cleaning method of activated carbon filtration equipment for drinking machine:1, the outer ring winding line, pipe and net should be washed with high pressure water, light brush, and soaked in bleach solution for one hour, then rinse off with clean water.
