How to install the induction cabinet sauna smart card electronic locker lock
Plug-in: Plug the locking cable into the corresponding socket on the front cover. After installation lock: the handle spring into the rear lock handle handle hole, a small square shaft into the knob hole, generous shaft into the lock cylinder fork
Install the lock: Screw the lock head 14 into the lock hole and screw it to the height of the locking head and the height of the front cover. Before installing the front cover: Put the handle spring into the front lock handle hole The large square shaft is put into the cylinder, and the front cover handle hole is aligned with the generous shaft, the lock hole and the lock head, and the front cover is closed.
Start the door lock by the corresponding relationship. Install the lock cylinder, insert the lock cylinder 11 into the door hole, fix it with screws, and insert the lock wire into the door inside.
Install the lock body ① choose the door with the same direction of the lock body; ② check the parts are complete, and power to try the door lock function is normal.
The rear lock handle handle hole and the generous shaft, the small square shaft and the cylinder small square shaft hole alignment, close the rear cover. Upper fixing screw: Adjust the front and rear locking positions and tighten the four locking screws. Fixed lock: adjust the lock position, so that the end face and front lock level, keyhole in a vertical position, the lock head screw tightening. Install the battery cover: Insert the battery compartment into the lock cylinder compartment. Upper side trim: Fix the side trim with screws 8.
