Home > categories > Telecommunications > Repeater > Is the bus relay fiber interface integrated with the bus repeater?
Question:

Is the bus relay fiber interface integrated with the bus repeater?

Is the bus relay fiber interface integrated with the bus repeater?

Answer:

Optical fibers use optical pulses to transmit information along the optical line, instead of using electrical impulses to transmit information along the cable. At one end of the system is the transmitter, the starting point of the information to the fiber line. The received electronic pulse information of the transmitter is derived from the copper wire cable, and then the information is processed and converted into an equivalent coded optical pulse. A light emitting diode or an injection laser is used to generate an optical pulse, and a lens is used to focus the light pulses into the optical fiber medium so that the light pulses are transmitted along the line in the optical fiber medium. The total internal reflection principle shows that the optical pulse easily eye optical line movement, optical principle of total internal reflection shows that when the incident angle exceeds the critical value, the light will not overflow from the glass; on the contrary, the fiber will be reflected back to the glass if the above do not want to see, look at this: is by resending the data signal or forward, to expand the network transmission distance to generate signals (i.e., amplifying and shaping of the original signal). Principle: a repeater is a device for connecting network lines, often used for two-way forwarding of physical signals between two network nodes. The repeater is the most simple network interconnection equipment, mainly to complete the physical layer, is responsible for the physical layer of two nodes according to a transmission of information, copy, adjust and complete the signal amplification function, in order to prolong the network length.
The total internal reflection principle shows that the optical pulse easily along the fiber line movement, optical principle of total internal reflection shows that when the incident angle exceeds the critical value, the light will not overflow from the glass; on the contrary, will be reflected back to the glass fiber. The effect is to extend the distance of the network transmission by re sending or forwarding the data signal, and then re generating the signal (i.e., amplifying and shaping the original signal).
Optical fibers use optical pulses to transmit information along the optical line, instead of using electrical impulses to transmit information along the cable. At one end of the system is the transmitter, the starting point of the information to the fiber line. The received electronic pulse information of the transmitter is derived from the copper wire cable, and then the information is processed and converted into an equivalent coded optical pulse. A light emitting diode or an injection laser is used to generate an optical pulse, and a lens is used to focus the light pulses into the optical fiber medium so that the light pulses are transmitted along the line in the optical fiber medium.
The bus relay fiber interface is not integrated with the bus repeaterA repeater is a device that connects network lines and is often used for two-way forwarding of physical signals between two network nodes. The repeater is the most simple network interconnection equipment, mainly to complete the physical layer, is responsible for the physical layer of two nodes according to a transmission of information, copy, adjust and complete the signal amplification function, in order to prolong the network length.

Share to: