What is the luminous flux of LED30W solar street lamps?
If it is accurate calculation method, we need to go to a professional testing center to test, our products are detected by Shanghai electric light source, and the corresponding test data is satisfactory.
High power LED street lamp has a long service life, and the light source life is over 50000 hours. It is 5~10 times of traditional lamp. The LED light source adopts the most advanced white 1W package, the surface bonding is welded on the 2mm thick aluminum based circuit board, and then the aluminum substrate is installed on the radiator plane to ensure the rapid heat transfer to the radiator. In addition the radiator and lamp shell integration design, fully guarantee the LED cooling requirements and service life. Advanced packaging technology to ensure high reliability of LED, good heat dissipation to ensure that LED work at the allowable temperature, the combination of the two, fully guarantee the long service life of LED.
The luminous flux of LED light source is 1W 45mil 110lm to 130lm (this is a test at the rated 25 degrees at room temperature, in the actual application is certainly not to), regular 30wled products are a lens two with a light, even the best lens in there will be the loss of good, good quality of the lens, the loss in 10%, ordinary loss in more than 30, LED street common 30W are the traditional lamp type, the lamp outside and glass lens, the light loss is higher, so the comprehensive down than ordinary street lamp has a conventional calculation method is practical the luminous flux per lamp w lumens 0.7 is multiplied by the number of lamps, the luminous flux *0.6, luminous flux *0.75 good quality, this is probably the calculation method.
