In reaming, do you choose the four edge of the reamer or the three edge? Why?

3 answer

Use and do not use the threaded hole reamer reamer, what do you mean, how to choose the aperture

3 answer

What is CNC reamer?

3 answer

With a machining center, the diameter of the hole is 28, and the cutting amount of the reamer when reaming

3 answer

What drill and reamer are used to process an empty diameter of 8mmH7?

3 answer

What causes shrinkage hole after diamond reamer machining?

3 answer

The drill holes to make reamer reaming little what method is solved, (drill reaming to hit Phi 8.5, Phi 9)

3 answer

In mechanical engineering materials, what are the materials of the reamer?

3 answer

Which is the higher accuracy of the reamer and reamer?

3 answer

The edge of the reamer and drill bit can cut metal, one is only oriented, and why?

3 answer

What's wrong with scratches after reaming in machining centers?

3 answer

The sale of these spiral reamer (punch) is illegal? Crime?

3 answer

The number of drills and reamers for diameter from 1 to 20.. The more detailed, the better

3 answer

How do you choose the tolerance of reaming when reaming?

3 answer

When reaming the piston pin hole and connecting rod copper sleeve, how much is the pin allowance?

3 answer

The difference between the reamer and tool?

3 answer

Hole diameter requirements 30, 0-4 wire, what specifications of the reamer?

3 answer

The problem of poor chip removal, special reamer scraps can not be found out. What's the main problem?

3 answer

What is the machining accuracy of the reamer?

3 answer

When reaming with carbide reamer, there will be a spiral mark on the hole wall. What's the problem?

3 answer

If you want to drill out 20 of the hole with a reamer, what size drill should you use first?

3 answer

Difference between milling cutter and reamer

3 answer

What's the result of the reaming of the inside hole of the reamer?

3 answer

Reaming Reaming hole diameter smaller, why processing material for ductile iron 500?

3 answer

NC machining, the speed and feed of the reamer

3 answer

How to heat the reamer with 40Cr material and how much hardness should be reached?

3 answer