Can?you?give?some?turf?artificial?grass?difference？
To move turf sites along the transverse direction spread out, and, in turn, from one end of the longitudinal edge to the other end, out, try to make the white line in the function of the weave on the turf line position, reduce the number of cutting; place the weave in the grass outside and failed to function to the line position of white line cut grass and aside to be used, if the white line is another weaving, 12 cm layer must be cut by hand
When the grass paving after joining together, turf folding part need to paper knife mouth, straightening and docking, overlap, and cementation;turf all processing has been completed, start with sand, quartz sand filling is completed, vertical and horizontal comb grass fiber brush grass machine all the time.
The position of the line and point to cut paper knife, cut out the article grass, will be connected into, optimum coating glue, put ready original white grass line back, consolidation pressure. Painting line in the corner of the narrow area of arc is difficult, the whole corner area can be removed, cut into small pieces after be put back together
The field length direction laid non-woven, orientation and direction of the arrangement of the lawn into 90 degrees, non-woven adhesive between firm.The rule to the pitch line of line length specifications, according to the drawing through introspection stick fine lines must be strong and flat.
The flat out on the non-woven lawn lawn in accordance with the original specifications need to overlap between 3 to 8 mm.Use lap lawn cutting knife cut flush, seam should be not more than 10 mm.Cutting area bottom seam of cloth, brush on the grass on the surface of the joint special glue, touch drying followed by merging knock firmly.
