Home > categories > Security & Protection > Safety Gloves > How does the maintenance worker work on the work of sulphuric acid?
Question:

How does the maintenance worker work on the work of sulphuric acid?

How does the maintenance worker work on the work of sulphuric acid?

Answer:

Because of this accident usually occurs in the chemical laboratory, burning area is not too large, immediately rinse with plenty of water, can reduce sulfate burning time, can effectively remove the concentrated sulfuric acid and concentrated sulfuric acid dilution heat of water will soon be taken away, will not cause more severe burning.
Wear special protective gloves and gas masks. It is better to wear protective clothing with better protection function. Refer to the safety tips on the label on the sulphuric acid barrel.
If it burns on a large area, it can not be washed immediately. Apply dry cloth, wipe with plenty of water, and then apply a small amount of sodium bicarbonate. It depends on the degree of release of the heat released during the dilution of the concentrated sulfuric acid.For the maintenance worker, the same depends on the area of his burns
If you get less, make sure you use a lot of water immediately. Don't wipe it with a cloth first.

Share to: