How to cut the glass into a triangle with a glass knife
with a glass knife cut 2-3m thick flat glass cut 2 a 3m thick flat glass can be used 2mm × 12mm fine wood ruler, the first amount of glass size, cut in the ruler size, to consider leaving 3mm empty File and 2mm blade
Glass knife can be divided into diamond glass knife and alloy roller glass knife, is suitable for cutting the thickness of 1-8 mm flat glass, is the decoration, building materials industry essential glass cutting tools
Cut the side of the glass with one side of the dimension Glass knife close to the other end of the ruler, grasp the blade straight back to the draw, can not have the severity of bending Second, with a glass knife cut 4-6mm thick glass cutting 4-6mm thick glass method is roughly the same as above, but because of the thick glass, cutting to grasp the standard, take stability, the severity of uniform There is also a cutting method is to use 4mm × 50mm ruler, glass knife close to the ruler cut Cutting, in the cut on the pre-brush on some kerosene, so that the oil cut easily after the cut off Third, with a glass knife cutting 5-6mm thick pieces of glass cutting 5-6mm thick pieces of glass and 5mm × 40mm ruler with the same cut But large pieces of glass area larger, people can not cut the ground, and sometimes need to stand on the glass cutting, cutting must be on the table before the mats, so that the glass pressure evenly, cut the hands after holding the required glass, while down Plate off, can not careless, and cause the whole piece of glass rupture Fourth, with a glass knife cut wire glass cutting method of glass with 5-6mm flat glass, but the folder glass cutting surface uneven, cutting edge easy to slide, difficult to master, so to recognize the knife-edge, , Harder than the average glass, the speed should be faster, so that it will not bend is not straight After cutting the hands of the glass force to pull down, clamp wire can be dialed, and then use the pliers will be cut wire cut, so as not to move through the palm of your hand Fifth, with a glass knife cutting embossed glass with glass knife cutting embossed glass, embossed surface should be down, cutting method and folder glass with the same Six, with a glass knife cutting frosted glass with glass knife cutting frosted glass, hair surface should be down, cutting method is the same and flat glass
