The main parameters of ultrasonic cleaning equipment
Ultrasound USES a generator with a high efficiency of 95%, the power of 10 to 100% adjustable 2, and the frequency of high-frequency ultrasonic frequencies, such as 40KHZ, 68KHZ, 132KHZ, etc. Special slow dehydration, circulating hot air drying, replacing traditional solvent dehydration. 4, there is a filter circulation system; Multi-groove ultrasonic cleaning technology;
Frequency: greater than 20KHz, which can be divided into low frequency, medium frequency, high frequency 3 segments. 2. The power density, power density = transmission power (W)/launch area (cm2) usually acuity 0.3 W/cm2, the higher the power density of the ultrasonic and cavitation effect is stronger, the faster, the better cleaning effect. But for delicate, surface finish, the high power density of long time can be used to "cavorate" the surface of the object. 3. The ultrasonic frequency, ultrasonic frequency is lower, the easier the cavitation in the liquid, the strength is big, has the stronger, is suitable for the workpiece (coarse, dirty) at the beginning of washing. High frequency of ultrasonic direction, suitable for fine cleaning. 4. Clean temperature: generally speaking, ultrasonic at 30 ℃ and 40 ℃ when cavitation effect is best. The higher the temperature, the greater the effect. Normally when actual application of ultrasonic wave, using the working temperature of 50 ℃ to 70 ℃.
The main parameters of ultrasonic cleaning equipment are internal slot size, frequency, power and heating power.
