The packaging tool of mobile phone film : 1, wet cloth, fiber cloth, dedusting paster, mobile phone protective film, scratch cards and replacement film label Step 1 of sticking the mobile phone film clean the screen: 2, First, use the wet cloth to wipe the screen for a few times back and forth, you should try to wipe the screen of mobile phone cleanly. The wet cloth can clean the grease and fingerprints on the screen 3, use the locomotive fiber cloth to wipe the screen, you don't worry about any dust or wool to paste on the screen, they can be handleed later 4, use the locomotive dedusting paster to clean the stubborn dirt, the dust or wool can paste cleanly step two of sticking the mobile phone film screen film: The mobile phone protective film is taken out from the package and paste directly on the mobile phone screen, and then determine the joint situation between the film and the screen and the location of film 5, There are two labels on the mobile phone protective?film. First, tear number 1 label and paste the mobile phone protective?film on the screen 6 , align at the hole and edge of the mobile phone screen, at the same time, you should not touch the using layer 7, after the whole mobile phone protective film is pasted on the screen, and then open No. 2 label 8, if there are bubbles, you can use locomotive scratch card to slowly scrap the air bubble on the mobile phone screen 9, (if there is a bubble which can not be squeezed out. You can use the vacuum film to stick up the film, and then gently scrape out the bubbles with the scratch card ) 10, use the wiper to clean the screen, the entire mobile phone film process is completed
Before sticking the film, you should clean up the screen, and then the mobile phone film is cutted as same as the mobile phone screen. The flim has three layers. First, you tear the first layer, you have to tear off the No.1 label and paste rapidly on the phone screen, and then push quickly with a platelet. past faster on a bubble won't have the. Tear off 2, the film is pasted well.
