Home > categories > Machinery & Equipment > Loaders > What are the transmission systems of the loader?
Question:

What are the transmission systems of the loader?

What are the transmission systems of the loader?

Answer:

The first and second turbine output shafts of the torque converter and the upper gear of the torque converter transmit power to the transmission. An overrunning clutch is arranged between the two input gears.The transmission is a planetary power shift gearbox with three stalls with two brakes and one latching clutch. The forward, the I and the reverse gear respectively have respective brakes to realize the shift. Forward II gear is achieved by combining locking clutch.The driving axle adopts double axle drive, the main drive adopts a first stage spiral bevel gear reducer, and the left and right half shafts are full floating type.2. loaders in the form of work: the former imperial, rotary, after the imperial styleFront imperial style: front shovel loading and unloading, simple structure, reliable work, good vision. Suitable for all kinds of working sites;Rotary type: the working device is mounted on a turntable which can be rotated from 90 to 360 degrees. Side unloading without shunting, the operation efficiency is high; complex structure, large weight, high cost, poor stability of side, suitable for narrow site operation;After unloading, front-end loading and unloading at the rear, high operation efficiency, poor operation safety and wide application.
The transmission of loader is from input to output in sequence: engine hydraulic torque converter - transmission shaft - axle (main reduction) - wheel side deceleration mechanism (planetary gear mechanism)
1. what are the components of the transmission system of the wheel loader? Its function and working principle are briefly described.The power line is the engine, hydraulic torque converter, transmission, front and rear drive axle, wheel side reducer, wheel.Hydraulic torque converter, loader adopts double turbo torque converter, can change its working condition automatically according to the change of external load. It is equivalent to a two gear automatic transmission, which improves the external load adaptability of loader.

Share to: