How is the regeneration cycle of the water softener calculated?
The resin work exchange capacity (mol/L) is the fixed value 1.2mol/LYour controller is not properly chosen because each of its switching cycles is only about six hours, so it's best to adjust your configuration and use a single standby mode
Periodic water production (M3) = effective resin filling volume (L) * resin exchange capacity (mol/L), total hardness (mg/L CaCO3) * 50Regeneration cycle = yield / rated water cycle
The water yield from the regeneration of the water softener to the next failure is related to the capacity of resin exchange, the amount of resin filling, the hardness of the raw water and the working condition of the softener. The value needs to be monitored during operation. The general methods of estimation are as follows:
