How to solve the problem of LED lamp out of light effect?
LED lamp belt is divided into two categories: soft and hard, and the types of light bands and installation methods used in indoor and outdoor are also different. In the purchase and installation, should be carried out according to practical purposes, in order to ensure good light, and extended service life.
When the lamp band is too long, the brightness of the tail of the lamp belt is not enough1) use a more powerful constant voltage drive. Unlike 3A appliances, you can drive 3528 soft lights with 6 meters, but in order to prevent the tail of the light belt brightness is not enough, you can use 4A appliances, to ensure that the appliance has sufficient margin. But the power of the appliance doesn't need to be higher, otherwise it will waste.2) change the way the lights are connected. 6 meters of 3528, you can use 5 meters +1 meters in parallel with the lights, you can also 3 meters +3 meters combination of parallel.
Irregular light effectIf the light effect is not neat, the installation groove can be used. Because in the decoration, the wall painting itself can not be ideal smooth condition, so prone to irregular light. The use of the installation box can effectively solve this problem.
The light does not come outLED light belts usually have a luminous angle of only 120 degrees, and some light grooves are too high for us to see the light produced by the LED band. For this reason, the LED lamp can be padded high, so that the distance between the lamp belt and the lamp slot is about 4-125px, or that the belt is attached to the side wall.
