The installation method of the reflective spike
Five, installation steps(1) first determine the installation position with a ruler, a 15m installation, (in accordance with the installation drawings) to ensure the vertical position in a straight line, while the lateral alignment around, installation requirements and design for quasi distance.(2) the ratio of glue, A glue and B glue 1:0.7, then add 15% - 30% of the cement as a filler (a glue is not easy to stir too much, enough for a person to stick 50-70 spike glue). The gel must be stirred evenly (with a torch and mixer). The color is consistent. Each spike used 40-50 grams of glue.(3) the installation position of the road should be cleaned, about 40-50 grams of glue onto the spike number of knives, back, set in position, with the beat and turn around two, and the spike tightly bonding pavement.(4) after the installation of the spike, spike around the overflow of glue, using the knife clean, and clean up the road.
Two, toolsHammer, disc cutter, small batch size, plastic barrel, chalk, generator, electric drill, mixing glue device.Three, productsPlastic spike (no nails)Four, auxiliary materialsEpoxy resin A, B, cement
Plastic reflective spike installation methodI. safety protectionRoad cones, construction diversion brand 2 sets, baton, reflective clothing each one. Before departure, everyone must wear reflective clothing, to the construction site must be put in good construction plate and road cone. (workers should do: no joke, no slapstick, follow the command, 6 hours before the road can not drink), each team with 2-4 security guards.
