Home > categories > Security & Protection > Alarm > why is it so hard to push copper fittings into the pipe i was trying to solder?
Question:

why is it so hard to push copper fittings into the pipe i was trying to solder?

after pushing very hard, the pipe went into the fitting. to take it out, i had to rock it from side to side or hit it with a putty knife to get it out. Is it normal? or maybe when i cut the pipe with the tube cutter, the pipe became out of round? i thought i cut it very slowly already. i used the 4in1 tool already and it was still very tight. should i hit them in with a block of wood or something? any good advise out there? thanks.

Answer:

There are many sites are available on the Internet that provide you reviews about alarm systems. After reading the reviews you’ll be in the state that you can decide that which car alarm system is good for your car. You are going to buy a car; you must get car alarm system as well at the time of purchasing a car. Talking car alarm system is also another good invention of the current time that speaks sentences similar to the human beings. Wireless car alarm system is also there to give you good quality results. We have very fine selection of the car alarm systems that can make your car safe and secure from theft. Our latest devices have very good results that provide people feel of comfy.
Medium Action 8-17lb rod/reel. Although pike and walleye might top the scale over the 17lbs your drag should be able to bring them it, just be patient when you are fighting them.For the rest it should be a problem. I would use 8lb line to target the Bass and crappie. On walleye it should work in most situations however if you are going for a record size one something a little heavier would work.Remember to use a steel leader and for pike as well. For pike I would use 20lb with a steel leader , however they can grow larger than this so use heavier line or set your drag properly.Lures I would suggest plastics,spinners,spoons,and crankbaits.

Share to: