Home > categories > Construction & Real Estate > Toilets > What is the installation skill of the squatting device?
Question:

What is the installation skill of the squatting device?

What is the installation skill of the squatting device?

Answer:

Squatting pan to change the toilet Practice: 1. Ground all planing, see the original squatting toilet drain [trap], removed to the connection with the riser at the three links, re-use UPVC tube pipe, you can add drainage and floor drain. The problem has two reasons: 1. The original squatting pan under the trap, the transformation should be used to buy squatting the kind of toilet [business know], or the toilet itself has a water trap , Two water trap, too much resistance, poor drainage. 2. If you have squatting the seat of the kind of toilet, poor drainage, should be connected to the tube of the cross tube is poor, the transformation should be clear and then installed. If you live on the floor, depending on the scene to determine the program: 1. The most thorough program, and downstairs consultation, plan out the toilet inside the ground [first class for the 20cm thick], remove the cast iron trap, with UPVC drainage pipe connected, Re-do the ground waterproof, closed water test after passing the decoration, the height is reduced, easy to use. 2. If the water pipe for the plastic tube or from the hug can remove the water trap, replaced by 90 ° elbow can not, do not damage the ground. I suggest you find a professional master to do, so as to avoid infinite trouble!
1, squatting change seat, first measure the distance from the center of the water to the wall. Buy the toilet according to this distance. Do not buy the so-called squatting ride special toilet, pick a hole from the appropriate siphon toilet. 2, before installing the toilet, must first test the sewer is smooth. Way: filled with a bucket of water, the whole barrel quickly into the sewer, pay attention to see the waterway in the water there is no rise. If there is a rise must be completely clear. Not up is qualified. 3, the installation should not seal the bottom of the toilet on both sides of the screw hole. Do not install any vent holes. The screw hole can exhaust. 4, if the conditions, it is best to go downstairs to the sewer into a direct elbow. The use of the pit is the trap. Not conducive to toilet water. So do not have to do the second job. 5, if the pipeline is not replaced, please note: some people in order to save water, will be less flushing, so easy to cause the pipeline aging or plug (siphon toilet to clear maintenance instructions).

Share to: